Product Overview
The LC100-2 Wall Pass-Through Cover trims the run where the line set passes through a wall. At 220 mm long it bridges the wall thickness and closes the gap around the duct, giving the penetration a finished edge instead of a raw cut hole.
Use one at every point where the line set enters or leaves a wall.
Specifications
| Model | LC100-2 |
|---|---|
| Part Name | Wall Pass-Through Cover |
| System | LC100 line set cover / duct trunking |
| Material | PVC |
| Colour | White |
| A | 107 mm |
| B | 70 mm |
| C | 220 mm |
| D | — |
| E | — |
| Dimensions (A x B x C x D x E) | 107 × 70 × 220 mm |
| Application | Mini-split refrigerant lines, drain hose and control cable |
Key Features
- Moulded PVC — weather resistant, UV stable, will not rust
- Snaps into the LC100 profile — no adapters between fittings
- Wider 100 mm profile — holds more lines and thicker insulation than the 75 mm series
- Hides and protects the line set — covers refrigerant lines, drain hose and cable in one run
- Clean finished look — turns an exposed line set into a neat trunking run
- Cuts and drills easily — trim on site with a saw
Applications
- Mini-split and heat pump line set runs on exterior walls
- Multi-zone runs carrying several line sets side by side
- Covering refrigerant lines, condensate drain and control cable together
- Retrofit tidy-ups on existing exposed line sets
What’s in the Box
- One LC100-2 Wall Pass-Through Cover
Installation Tips
- Dry-fit the whole run first, then snap the pieces together in order
- Cut straight sections square so joints close flush
- Fix the trunking to the wall at regular intervals, especially before and after every fitting
- Seal wall and ceiling entry points with silicone where the line set passes through
Reviews
There are no reviews yet.