Product Overview
The LC75-7 End Connector closes off the end of the LC75 run. It caps the open profile so the refrigerant lines, drain hose and cable are sealed in, and the run ends cleanly instead of stopping at a cut edge.
Fit one at the terminal point of every run.
Specifications
| Model | LC75-7 |
|---|---|
| Part Name | End Connector |
| System | LC75 line set cover / duct trunking |
| Material | PVC |
| Colour | White |
| A | 60 mm |
| B | 42 mm |
| C | 80 mm |
| D | 70 mm |
| E | 96 mm |
| Dimensions (A x B x C x D x E) | 60 × 42 × 80 × 70 × 96 mm |
| Application | Mini-split refrigerant lines, drain hose and control cable |
Key Features
- Moulded PVC — weather resistant, UV stable, will not rust
- Snaps into the LC75 profile — no adapters between fittings
- Hides and protects the line set — covers refrigerant lines, drain hose and cable in one run
- Clean finished look — turns an exposed line set into a neat trunking run
- Cuts and drills easily — trim on site with a saw
Applications
- Mini-split and heat pump line set runs on exterior walls
- Covering refrigerant lines, condensate drain and control cable together
- Retrofit tidy-ups on existing exposed line sets
What’s in the Box
- One LC75-7 End Connector
Installation Tips
- Dry-fit the whole run first, then snap the pieces together in order
- Cut straight sections square so joints close flush
- Fix the trunking to the wall at regular intervals, especially before and after every fitting
- Seal wall and ceiling entry points with silicone where the line set passes through
Reviews
There are no reviews yet.