Product Overview
The LC75-3 Horizontal Elbow turns the duct run 90 degrees along a flat wall. Use it when the line set has to change direction but stays on the same wall plane — for example running down and then across to reach the condenser.
Snaps into the LC75 profile on both sides, so the bend is continuous with no visible seam.
Specifications
| Model | LC75-3 |
|---|---|
| Part Name | Horizontal Elbow |
| System | LC75 line set cover / duct trunking |
| Material | PVC |
| Colour | White |
| A | 80 mm |
| B | 70 mm |
| C | 128 mm |
| D | — |
| E | — |
| Dimensions (A x B x C x D x E) | 80 × 70 × 128 mm |
| Application | Mini-split refrigerant lines, drain hose and control cable |
Key Features
- Moulded PVC — weather resistant, UV stable, will not rust
- Snaps into the LC75 profile — no adapters between fittings
- Hides and protects the line set — covers refrigerant lines, drain hose and cable in one run
- Clean finished look — turns an exposed line set into a neat trunking run
- Cuts and drills easily — trim on site with a saw
Applications
- Mini-split and heat pump line set runs on exterior walls
- Covering refrigerant lines, condensate drain and control cable together
- Retrofit tidy-ups on existing exposed line sets
What’s in the Box
- One LC75-3 Horizontal Elbow
Installation Tips
- Dry-fit the whole run first, then snap the pieces together in order
- Cut straight sections square so joints close flush
- Fix the trunking to the wall at regular intervals, especially before and after every fitting
- Seal wall and ceiling entry points with silicone where the line set passes through
Reviews
There are no reviews yet.